Completed Repair

Memorial Bench Repair

ByMark

A neighbor and active member of Daniel Boone Conservation League commissioned a replacement back for a memorial bench on the club grounds. The original bench back appeared to have been laser engraved but suffered severe weathering to make it unreadable. A V-Carved back was selected for the replacement because even if it becomes weathered, it will still be readable.

Shellac Coat
A 2×12 Douglas Fir board was milled to 1″ thick and two coats of dewaxed shellac were applied before carving.
CNC Setup
The bench back was longer than the bed of my CNC router so shims were used to elevate the work above the Y axis machine components.
V-Carving Bench Back
The design was completed using Vectric’s V-Carve Pro software and the back was carved in three separate operations.
Jerry Holding Carved Back
Jerry poses with the completed carving. The letters and graphics were filled with black ink and HVLP sprayed with 3 coats of spar varnish.
Existing Bench
Here is a look at the bench that had weathered.
Removing Rain Cap
Jerry removing the rain cap from the old wood.
Support Beams
The stone sides have embedded 2x4s that support the bench back.
Attaching the New Back
Mark attaches the new back to the 2x4s using outdoor rated hardware. The rain cap was then put back in place.
Completed Repair
A look at the new bench back. Hopefully the back will last several years before needing replacement.

Similar Posts

Perspective View 1
|

Recipe Box

ByMark

I was fascinated with Michael Tyler’s Paradise Box project on Vectric’s website so I decided to use his design and customize it for my wife Marilyn. Michael’s plans were modified to account for thinner stock and the sides were custom carved and given a gentle arc. Additional V-carving was done on the inside lid to…

Dutch Clock
|

Dutch Clock

ByMark

As I gain more experience with the CNC router, I am trying different projects both as a learning tool as well as making interesting items. This blog details some of the steps in the manufacture of a Dutch clock mimicking the style of Tole painting. I downloaded the free project from Vectric’s website and modified…